Waterproofing primer - Bituprime P02

Bituprime Waterproof – P02 is an emulsified bitumen base primer produced by a special emulsifier and stabilizer to have good surface coverage and waterproofing performance. It is non-toxic once dried and is ideal for waterproofing flat roofs, gutters, flashings, water reservoirs, and koi ponds.
The product can be cold applied to vertical and horizontal surfaces and once dried; it forms a tough, durable, and flexible waterproof barrier.

Product technical data

Application areas:

Bituprime waterproof is used to prepare the substrate for the application of torch-on, self-adhesive, or other types of waterproofing materials. It’s suitable to prime concrete roofs and floors, cementitious screeds/renders, brickwork, bitumen felt, weathered bitumen, mastic asphalt, weathered, corrugated iron, and steel.

• Waterproofing of flat roofs, parapets, and flashings
• Waterproofing of ponds and water reservoirs
• Sealing of joints between different roofing materials, gutter joints, and roof screws
• Waterproofing and protective coating for below-ground foundations

Limitations:

Do not apply if the temperature is below 5°C

Do not apply to damp surfaces

Bitumen compounds have poor UV resistance and must be over-coated with paint if exposed to sunlight or UV rays. Due to the tendency of bitumen compounds to bleed through and discolor paints applied over them.

Bitumen primer Consumption:

Bituprime Waterproof – P02 consumption per m2 will be 0.25–0.35 l/m² (1 l per 3.33 m²).

Method of application:

Bituprime Waterproof – P02 should be applied to the prepared surface to clear off any debris or sharp projections. Agitate the pails(drum) before use then the primer should be applied in continuous coat using a roll or brush penetrating the surface and providing a smooth and well-adhered base for subsequent waterproofing layers. Apply at temperatures +5°C – +40°C, water can be added if necessary.

Note: Tools and brushes must be cleaned immediately after use with water and soap

Advantages:

• Ready to use 
• Suitable for indoor applications 
• Solvent free, non-flammable 
• Water-based, Environment-friendly
• Cost-efficient, easy to apply

Safety instructions:

Bituprime Waterproof – P02 is non-toxic, however, it is advisable to wear gloves in order to avoid direct skin contact. In the event of skin or eye contact, rinse thoroughly and immediately with water.    Seek medical assistance if irritation or discomfort persists.  Keep out of reach of children!  Refer to our Safety Data Sheets for further toxicological information and comprehensive handling instructions.

Storage:

 Store in a dry place protected against sunlight at a temperature not less than +5°C. Shelf life - 9 months. Ensure the container is closed to create an airtight environment when not in use.

Availability

Bituprime Coating – P02 is available in:

·        Bulk

·        IBC Tank, Flexi Tank

·        Reconditioned steel drums 220 lit., Net Weight: 200 ± 3 Kg

·        New steel drums 220 lit., Net Weight: 200 ± 3 Kg

20 Lit pails