Bitumastic M07 is a multi-component material combining polymer-modified bitumen, fillers, organic solvents, and technological additives. The Bitumastic M07– Cold apply mastic is a fire-free solution to the Pour and Roll application, the cold mastic can be applied in the same way as hot melt application but without hazardous fire melting and hot works permit processes.
Product technical data
|
PROPERTIES |
PERFORMANCE |
|
Strength of adhesion to the base - with concrete, MPa |
0.6 |
|
Strength of adhesion to the base - with metal, MPa |
0.45 |
|
Strength of adhesion between layers, MPa |
0.3 |
|
Strength of adhesion between layers, MPa |
0.3 |
|
Heat endurance, °С |
95 |
|
Shear strength of the glued bond, kN/m |
4.0 |
|
Mass fraction of non-volatile substances, % |
70 |
|
Bucket volume, kg |
20 |
Application areas:
Bitumastic M07– Cold-apply mastic is used in traditional built-up waterproofing applications to adhere sand-surfaced rolled membranes to any type of substrate.
Consumption:
0.8–1.8 kg per 1 m2 depending on the base type.
Advantages:
- Ready to use (must be well stirred before application)
- Fire-free traditional pour and roll application
- Provides additional strength to traditional build-up systems
- Gives highly reliable bonding to roofing membranes
Method of application:
The cold applied mastic should be poured onto the surface, then leveled out using a toothed knife or stiff comb.
Storage:
Store in a dry place protected against sunlight at a temperature between -20°C and +30°C. Shelf life - 18 months.
Availability
Bitumastic – M07 is available in:
· Bulk
· IBC Tank, Flexi Tank
· Reconditioned steel drums 220 lit., Net Weight: 200 ± 3 Kg
· New steel drums 220 lit., Net Weight: 200 ± 3 Kg
· 20 Lit pails