After drying, the material forms a highly strong and elastic covering, highly resistant to temperature changes, considerably increasing the service life of the protected surfaces.
Product technical data
|
PROPERTIES |
PERFORMANCE |
|
Strength of adhesion to the base - with concrete, MPa |
0.6 |
|
Strength of adhesion to the base - with metal, MPa |
0.9 |
|
Heat endurance, °С |
110 |
|
Specific elongation when broken, % |
500 |
|
Flexibility on R=5.0±0.2 mm beam at -5°C |
no cracks |
|
Water resistance during 24 h at a pressure of 0.1 MPa |
withstands |
|
Bucket volume, kg |
18, 10, 3 |
Application areas:
- Entire roof waterproofing including details and parapets.
- Waterproofing of engineering structures (basements, footings, piles, and other building elements buried underground likely to be in contact with a damp environment).
- Weatherproofing and anti-corrosion treatment of metal surfaces including pipelines and car bodies.
Consumption:
- for mastic roof installation: 3.8–5.7 kg/m2;
- for waterproofing installation: 2.5–3.5 kg/m2.
Advantages:
- Ready to use
- Tough and highly elastic product
- Can be used at temperatures below 0°C
- Significantly prolongs the service life of protected structures
Method of application:
Bitumastic M06-CS – Roofing mastic should be applied to the prepared surface to clear any debris and surplus materials, mastic can be applied by using a stiff paint brush, filling knife, or by pouring and leveling. Single-layer thickness should not exceed 1.5 mm, each subsequent layer must be applied after the previous layer is completely dry. It is highly recommended to apply a minimum of 2 layers, to achieve durable waterproofing.
Storage:
Store in a dry place protected against sunlight at a temperature between -20°C and +30°C. Shelf life - 18 months.
Availability
Bitumastic – M06 is available in:
· Bulk
· IBC Tank, Flexi Tank
· Reconditioned steel drums 220 lit., Net Weight: 200 ± 3 Kg
· New steel drums 220 lit., Net Weight: 200 ± 3 Kg
· 20 Lit pails
· 12-14 Kg cardboard box