Bitumastic M04 - Polymer bitumen mastic sealant is a single component hot applied crack and joint sealant consisting of bitumen modified by artificial rubber and special additives. When melted and properly applied it forms a resilient crack sealant for both asphaltic and cementitious pavements. The sealant has a wide range of operating temperatures, high elasticity, lack of shrinkage, and short curing time. It is produced in three grades: M04-G25, M04-G35, and M04-G50.
Product technical data
|
PROPERTIES |
M04-G25 |
M04-G35 |
M04-G50 |
|
Melting point, ºС |
90 |
90 |
90 |
|
Auxiliary bar plasticity of ⌀20 mm, °C |
-25 |
-35 |
-50 |
|
Mobility under the influence of UV, h |
1 000 |
1 000 |
1 000 |
|
Robustness, cycle number |
30 000 |
30 000 |
30 000 |
|
Total extension, not less than -20 ºС, % |
75 |
75 |
75 |
Area of application:
· Expansion joints in concrete and asphalt coatings, sealing of airfields and motor roads.
· Cracks curing of airfields and motor roads concrete and asphalt coatings
LIMITATIONS
Do not overheat material. Cracks must be free from moisture, dust, loose aggregate and other contaminates before application
Consumption:
Actual material usage may vary due to the width of application and thickness of material above pavement surfaces.
Storage
Cracks must be free from moisture, dust, dirt, and debris. Both substrate and air temperature must be above 5°C. Keep boxes of material dry during storage. Do not store in direct sunlight.
Availability
Bitumastic – M04 is available in:
· Bulk
· IBC Tank, Flexi Tank
· Reconditioned steel drums 220 lit., Net Weight: 200 ± 3 Kg
· New steel drums 220 lit., Net Weight: 200 ± 3 Kg
· 20 Lit pails
12-14 Kg cardboard box